Packaging (LxWxH): ca. 500mm x 300mm x 70mm
- View cart You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart.
PONGAMI (PFA 185 U)
Auf Lager
With PONGAMI, our new folding trailer, we are going in a completely new direction in trailer construction. Pongami stands for generous loading dimensions with a minimum space requirement for storage at the same time. By means of our clever folding mechanism, the trailer can simply be folded without any effort at all. This saves valuable space...
Quicklinks
Zu den Ersatzteilen Zum passenden Zubehör
description | value |
---|---|
Total weight | 750 kg |
Load capacity | 575 kg |
Self-weight | 175 kg |
Total length | 3.090 mm |
Total width | 1.590 mm |
Total height | 790 mm |
Loading dimensions inside - length | 1.840 mm |
Loading dimensions inside - width | 1.180 mm |
Loading dimensions inside - height | 290 mm |
Sill height | 500 mm |
With PONGAMI, our folding trailer, we are breaking new ground in the Trailer construction. Pongami stands for generous load dimensions while minimizing Space required for storage. By means of our clever folding mechanism The trailer can be folded easily and without effort. This saves valuable space when the Pongami is not needed. High quality components, careful vehicle construction and our love for Detail make our followers to long-lasting partners. Here we play ours Know-how in terms of best quality, easy handling and highest Safety during transport. A wide range of accessories makes ours PONGAMI the ideal companion for leisure, home and garden. No matter if boat, Two-wheeler, greens or furniture on move - Pongami unfolds at each Transport his possibilities
Serienmäßige Grundausstattung
- Lashing option for load securing
- Maintenance-free rubber suspension axles
- steel fenders
- Multifunction lights
- Torsion-free chassis
- 13-pin light connector
- Jockey wheel
description | value |
---|---|
Material type | steel |
brake | unrestrained |
Single axle / tandem | Single axle (1 axle) |
Tires (inches) | 10 inch |
Number of lashing points | 4 |
Hydraulic system | No |
Hinged front wall | No |
Tilted | Yes |
Unser passendes Zubehör
Zubehör versandkostenfrei bei Direktkauf eines PONGAMI-Anhängers bei Pongratz*
-
Flachplane zu PFA 185 U ArtNr. 21870€84.00 inkl. Mwst.The flat tarpaulin protects the freight against wind and weather. The assembly is due to the integrated rubber bands quick and easy and fits perfectly on the ground walls or alternatively on the on-board side walls (ANR 21872). To prevent the formation of water drops, we recommend to use a crossbar (ANR 21871).
Packaging (LxWxH): ca. 500mm x 300mm x 70mm -
Planenspriegel zu Flachplane zu PFA 185 U ArtNr. 21871€44.76 inkl. Mwst.The tarpaulin crossbar should be mounted in the middle across from one longitudinal wall to another to prevent the formation of water drops when using the flat tarpaulin (ANR21870). The crossbar will increase the lifetime of the tarpaulin significantly and prevented from any contamination by stagnant water. Scope of delivery is 1 piece.
Packaging (LxWxH): ca. 1270mm x 150mm x 140mm -
Aufsatzwände 400 mm zu PFA 185 U ArtNr. 21872€408.00 inkl. Mwst.Enlarge the Pongami to a loadmaster. With the extension sidewalls, the loading volume of the Pongami is more than doubled. A loading height of 700mm could be reached together with the sidewalls of the trailer and the 400mm high extension sidewalls. Of course, it is also possible to use the flat tarpaulin (ANR 21870) or the protective net (ANR 21874) in combination with the 400mm extension side wall. The mounting material is included in delivery.
Packaging (LxWxH): ca. 2100mm x 450mm x 170mm
Zur Montageanleitung -
Laubgitteraufsatz 500 mm zu PFA 185 U ArtNr. 21873€444.00 inkl. Mwst.Whether foliage, garden waste or other cargo. The perforated sidewalls are quick and easy to install and will enlarge the loading height of the Pongami by 500mm. The perforation on the side and front surfaces allows for ventilation and reduces drag during driving.
Packaging (LxWxH): ca. 2100mm x 550mm x 170mm
Zur Montageanleitung -
Schutzhülle mit Reißverschluß zu PFA 185 U ArtNr. 21877€247.56 inkl. Mwst.Store your Pongami from damage and contamination. The cover is made of robust material which protects the trailer from wind, weather or other dirt in the folded state. Made to measure, the case is closed quickly and easily with a zipper. So your Pongamit stays clean and tidy over the years, as on the first day.
Packaging (LxWxH): ca. 602mm x 372mm x 268mm -
Rollwagen zu PFA 185 U ArtNr. 21878€186.00 inkl. Mwst.With the practical trolley her Pongami remains mobile even when folded. The trailer is tilted directly onto the trolley during folding and can be moved in any direction through the four 360 ° rotatable rollers. Even on the trolley, the Pongami is still compact enough to fit through a standard door. This also allows storage within a house, for example, in a basement, corridor or staircase. A practical accessory, especially if the Pongami can not be folded on its intended storage space due to space reasons.
Packaging (LxWxH): ca. 500mm x 500mm x 150mm
Zur Montageanleitung -
Bootsauflage (passend für max. 4m ArtNr. 21880€703.67 inkl. Mwst.What could be better than a trip to the lake with your own boat. With the boat mooring the Pongami becomes a boat trailer for ships up to a length of 4 meters. The loading in combination with the optional winch can be carried out easily and without effort by only one person. The rubberized keel rollers at the front and rear as well as the side supports protect the delicate boat hull against damage and secure the boat against slippage during transport on the road.
Packaging (LxWxH): ca. 1300mm x 400mm x 500mm
Zur Montageanleitung -
Ersatzradhalterung zu PFA 185 ArtNr. 21881€60.00 inkl. Mwst.With the spare wheel holder, the matching spare wheel (ANR 21882) can be easily and space-saving fixed on your Pongami. In case of puncture, save yourself a time-consuming search for a suitable workshop. Carrying a spare tire allows a quick and easy restoration of the ability to drive. A sensible extra, especially when traveling abroad or at other distances from home.
Packaging (LxWxH): ca. 700mm x 145mm x 70mm
Zur Montageanleitung -
Komplettrad 10 Zoll ArtNr. 21882€88.80 inkl. Mwst.In the event of tire damage, save a time-consuming search for a suitable workshop. Carrying a spare tire allows a quick and easy restoration of the ability to drive. A sensible extra, especially when traveling abroad or at other distances from home. For mounting directly on your Pongami we recommend the matching spare wheel holder (ANR 21881).
Packaging (LxWxH): ca. 520mm x 520mm x 160mm -
Fahrradträger (nur Träger) zu PFA 185 U ArtNr. 21884€116.62 inkl. Mwst.With the universal carrier, the load capacity of the trailer can be significantly extended. The assembly is done by simple screw closures directly on the sidewalls. The distance between the carriers and the positioning are infinitely variable and can be ideally adapted to the respective load. Due to the ingenious mounting system, it is possible to mount it even with the flat cover attached. Delivery in pairs.
Packaging (LxWxH): ca. 1220mm x 250mm x 100mm
Zur Montageanleitung -
Motorradwippe zu PFA 185 ArtNr. 21885€143.69 inkl. Mwst.The motorcylce rocker with stand turns the Pongami into a bike transporter. By simply driving up with the front tire, the rear rocker wing folds forward and thus fixes the motorcycle in the direction of travel and secures it at standstill against tipping over. Attention: Further load securing with straps is nevertheless necessary. For easy loading and unloading we recommend the suitable ramp with a load capacity of 400kg (ANR 21886). The mounting material is included in delivery.
Packaging (LxWxH): ca. 495mm x 295mm x 195mm
Zur Montageanleitung -
Auffahrschiene (Tragkraft: 400 kg) zu PFA 185 ArtNr. 21886€183.25 inkl. Mwst.The matching ramp with a maximum payload of 400kg makes loading and unloading your Pongami easier. Heavy loads such as motorcycles, e-bikes or the like can be loaded effortlessly. Scope of delivery 1 piece.
Packaging (LxWxH): ca. 1700mm x 260mm x 80mm
Zur Montageanleitung -
Winch with stand to PFA 185 ArtNr. 21887€183.25 inkl. Mwst.The belt winch and the appropriate winch stand allow easy loading and unloading of your Pongami. Heavy loads can be easily and quickly charged with the belt winch. Likewise, the winch allows a controlled unloading of rollable load. During the journey, slipping against the direction of travel can be prevented by the fixed winch. The right winch stand is included in delivery.
Packaging (LxWxH): ca. 790mm x 260mm x 190mm
Zur Montageanleitung -
Halterung für Seitenwand PFA 185 ArtNr. 21888€22.91 inkl. Mwst.The plug holder is used to fix and secure the lateral side walls, provided when the front and or rear wall is removed for loading. There are always 2 pieces per removed side wall required. Scope of delivery 1 piece.
Packaging (LxWxH): ca. 535mm x 80mm x 60mm
Zur Montageanleitung -
Motorrad Verlängerungszurrstangen zu PFA ArtNr. 21990€54.00 inkl. Mwst.The optional motorcycle extension bars allows transport of two motorcycles on Pongami.
Packaging (LxWxH): ca. 320mm x 280mm x 110mm -
Seitenwand-Sicherungsstange zu PFA ArtNr. 21991€34.98 inkl. Mwst.The sidewall-stabilization bar allows using Pongami without front and/or rear walls. This is important for loading payload longer as loading floor. Attention: Please mention local determinations for overlapping loads.
Packaging (LxWxH): ca. 1290mm x 85mm x 70mm
Zur Montageanleitung
Matching spare parts to your trailer
Ersatzteile versandkostenfrei bei Direktkauf eines PONGAMI-Anhängers bei Pongratz*
-
Sperrbolzen für Zugdeichsel PFA 185 U ArtNr. 22016€19.82 inkl. Mwst.Sperrbolzen für Zugdeichselsicherung passend zu PFA 185 U
-
Kotflügel links ArtNr. 22017€79.20 inkl. Mwst.Kotflügel links mit Schmutzfänger passend zu PFA 185 U
-
Kotflügel rechts ArtNr. 22018€79.20 inkl. Mwst.Kotflügel rechts mit Schmutzfänger passend zu PFA 185 U
-
Laufachse rechts PFA 185 U ArtNr. 22019€329.84 inkl. Mwst.Ersatzachse rechts passend zu PFA 185 U
-
Laufachse links PFA 185 U ArtNr. 22020€329.84 inkl. Mwst.Ersatzachse links passend zu PFA 185 U
-
Faltachsenverbindung PFA 185 U ArtNr. 22021€88.13 inkl. Mwst.Faltachsenverbindung passend zu PFA 185 U
-
Seilzug kurz PFA 185 U ArtNr. 22022€31.24 inkl. Mwst.Seilzug kurz passend zu PFA 185 U
-
Seitenwand beidseitig PFA 185 U ArtNr. 22023€179.09 inkl. Mwst.Seitenwand links und rechts passend zu PFA 185 U
-
Rückwand PFA 185 U ArtNr. 22024€137.44 inkl. Mwst.Rückwand passend zu PFA 185 U
-
Stirnwand PFA 185 U ArtNr. 22025€137.44 inkl. Mwst.Stirnwand passend zu PFA 185 U
-
Gegenstück für Spannverschluss PFA 185 U ArtNr. 22027€4.16 inkl. Mwst.Gegenstück für Spannverschluss passend zu PFA 185 U
-
Scharnier für Seitenwand PFA 185 U ArtNr. 22028€10.50 inkl. Mwst.Scharnier für Seitenwand passend zu PFA 185 U
-
Scharnier für Stirn- und Rückwand PFA 185 U ArtNr. 22029€12.60 inkl. Mwst.Scharnier für Stirn- und Rückwand passend zu PFA 185 U
-
Spannverschluss für Seitenwand PFA 185 U ArtNr. 22030€7.94 inkl. Mwst.Spannverschluss für Seitenwand PFA 185 U
-
Kunststoffrad hinten seitlich PFA 185 U ArtNr. 22031€16.66 inkl. Mwst.Kunststoffrad hinten seitlich passend zu PFA 185 U
-
Rückstrahler weiß PFA 185 U ArtNr. 22033€2.09 inkl. Mwst.Rückstrahler weiß selbstklebend passend zu PFA 185 U
-
Rückstrahler orange PFA 185 U ArtNr. 22034€2.09 inkl. Mwst.Rückstrahler orange selbstklebend passend zu PFA 185 U
-
Rückleuchte links PFA 185 U ArtNr. 22036€21.95 inkl. Mwst.Rückleuchte links passend zu PFA 185 U
-
Cellone für Rückleuchte rechts PFA 185 U ArtNr. 22038€18.12 inkl. Mwst.Cellone für Rückleuchte rechts passend zu PFA 185 U
Packaging (LxWxH): ca. 240mm x 140mm x 20mm -
Cellone für Rückleuchte links PFA 185 U ArtNr. 22039€18.12 inkl. Mwst.Cellone für Rückleuchte links passend zu PFA 185 U
Packaging (LxWxH): ca. 240mm x 140mm x 20mm -
Siebdruckplatte PFA 185 U ArtNr. 22043€133.27 inkl. Mwst.Siebdruckboden passend zu PFA 185 U
-
Planenknopf PFA 185 15 Stk. ArtNr. 22044€9.00 inkl. Mwst.15Stk Planenknöpfe passend zu PFA 185 U
Packaging (LxWxH): ca. 20mm x 20mm x 25mm -
Planengestell 900 mm ArtNr. 22009€308.28 inkl. Mwst.Planengestell 900mm zu PFA 185 U
-
Hochplane zu PFA 185 U ArtNr. 21992€300.00 inkl. Mwst.Hochplane 900mm zu PFA 185 U Planen Material Complan Art.641/ Farbe 832
Packaging (LxWxH): ca. 602mm x 372mm x 268mm -
Stützrad PFA 185 U ArtNr. 22011€49.48 inkl. Mwst.Stützrad komplett mit Halter, passend zu 'Pongami' PFA 185 U
-
Seilwinde für Klappvorgang ArtNr. 22013€120.72 inkl. Mwst.Ersatzwinde zum Falten für PFA
-
Umlenkrolle PFA 185 U ArtNr. 22014€20.89 inkl. Mwst.Umlenkrolle für Seilführung passend zu PFA 185 U
-
Zugdeichsel PFA 185 U ArtNr. 22015€174.08 inkl. Mwst.Zugdeichsel passend zu PFA 185 U
-
Seilzug lang PFA 185 U ArtNr. 22113€42.14 inkl. Mwst.Seilzug lang passend zu PFA 185 U
-
Ersatzkurbel für Seilwinde ArtNr. 22112€38.18 inkl. Mwst.Ersatzkurbel für Seilwinde passent zu PFA 185 U
Packaging (LxWxH): ca. 240mm x 200mm x 40mm -
Sicherungsstecker 45mm für Aufsatzwand und ArtNr. 22601€10.25 inkl. Mwst.Sicherungsstecker 45mm für Aufsatzwand und Laubgitter passend zu PFA
Packaging (LxWxH): ca. 70mm x 60mm x 20mm -
Ringschraube für Stützradfixierung ArtNr. 22490€21.84 inkl. Mwst.Ringschraube für Stützradfixierung
Packaging (LxWxH): ca. 100mm x 70mm x 45mm