Brake compensation tandem ALKO
EPA 250/12 T-RS-STK
Long durability through corrosion-resistant, hot-dip galvanized, twice-compressed board walls Extraordinarily high stability thanks to solid welded frame construction Very versatile Easy maintenance and repair on replaceable (forked) drawbar Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system Model with strengthened rear panel and continuous hinges available
Long durability through corrosion-resistant, hot-dip galvanized, twice-compressed board walls Extraordinarily high stability thanks to solid welded frame construction Very versatile Easy maintenance and repair on replaceable (forked) drawbar Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system Model with strengthened rear panel and continuous hinges available
- Lashing possibilities for securing the load
- Maintenance-free rubber spring axle
- Elastic-plastic fenders on single axle trailers
- Sturdy-steel fenders on tandem trailers
- Multifunctional luminaires
- Torsion-free chassis
- Depending on the model 7 or 13-pin light plug
- Supporting wheel on trailers with run up brakes
- Depending on the model with hinged front wall
- Screw-on console for parking supports
Unsere Ersatzteile für Ihren Anhänger
-
ArtNr. 14682
-
Clamp II DM 60 for supporting wheel II ArtNr. 14765
Clamp II DM 60 for supporting wheel II
Packaging (LxWxH): ca. 130mm x 100mm x 190mm -
Tension lock EPA ArtNr. 14773
Tension lock EPA
Packaging (LxWxH): ca. 225mm x 90mm x 40mm -
Buffer for front board wall ArtNr. 14842
Buffer for front board wall, suitable for PHL and LH
-
Ball nut M 10 35mm ArtNr. 14929
Ball nut M 10 35mm
-
Front base board wall EPA 206/12 - 250/12 ArtNr. 15378VZ
-
Galvanised rear base board wall EPA ArtNr. 15382VZ
-
cover cap 35x35 ArtNr. 11777
cover cap 35x35
-
connection bracket M8 for LPA /EPA/FPA ArtNr. 11805
connection bracket M8 for LPA /EPA/FPA
Packaging (LxWxH): ca. 68mm x 58mm x 15mm -
sidelight ArtNr. 11819
sidelight, type: DC with bracket
Packaging (LxWxH): ca. 100mm x 70mm x 50mm -
DC plug ArtNr. 11876
DC plug
Packaging (LxWxH): ca. 30mm x 30mm x 15mm -
registration plate light ArtNr. 11932
registration plate light, type: Aspöck DC, small
Packaging (LxWxH): ca. 85mm x 75mm x 30mm -
mudguards ArtNr. 11991
mudguards, tandem, steel, for tyres 13 inch (span 1550 mm, width 200 mm)
Packaging (LxWxH): ca. 1550mm x 200mm x 410mm -
brake cable ArtNr. 12211
brake cable, with fitting, new version with fitting, HL 1320
-
brake cable ArtNr. 12215
brake cable, with fitting, new version with fitting, HL 770
Packaging (LxWxH): ca. 990mm x 30mm x 30mm -
wheelscrews ArtNr. 12408
wheelscrews, conical collar
Packaging (LxWxH): ca. 45mm x 25mm x 25mm -
Light Multipoint 5 ArtNr. 17747
Light Multipoint 5 left with licence plate light with rear fog light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 80mm -
Light Multipoint 5 ArtNr. 17748
Light Multipoint 5 right with licence plate light with reversing light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 80mm -
Control device with V-connection 161S ArtNr. 12617
Control device with V-connection 161S, bottom mounting, with gas spring, weight range 950-1600kg
-
Wheel 155/80 R13 ArtNr. 12770
Wheel 155/80 R13 on rim 4Jx13 ET+30 Bolt circle 4x100
Packaging (LxWxH): ca. 580mm x 0.1mm x 150mm -
Licence plate holder black ArtNr. 19346
Licence plate holder black
Packaging (LxWxH): ca. 525mm x 140mm x 15mm -
Pongratz dirt trap red with logo 'P' ArtNr. 19347
Pongratz dirt trap red with logo 'P'
-
Supporting wheel II without clamp 1200 - ArtNr. 12882
Supporting wheel II without clamp 1200 - 1600 kg total weight
Packaging (LxWxH): ca. 605mm x 280mm x 105mm -
bracket for wheel chock ArtNr. 21322
bracket for wheel chock, plastic
-
wheel chock ArtNr. 21323
wheel chock, plastic
-
Reflector orange Ø60mm ArtNr. 13363
Reflector orange Ø60mm
-
Cable set 6m/13pin/bayonet/with outflow ArtNr. 13366
Cable set 6m/13pin/bayonet/with outflow
-
Base plate s=18 mm ArtNr. 13601
Base plate s=18 mm, 2500 x 1168 mm screen/film brown
Packaging (LxWxH): ca. 2500mm x 1168mm x 18mm -
Stern-handwheel bolt M10 ArtNr. 21611
Stern-handwheel bolt M10
-
Scheibe ST. A2K 9021 100HV M6 ArtNr. 21734
Stern-handwheel bolt M10
-
Stern-handwheel bolt M10 ArtNr. 21779
Stern-handwheel bolt M10
-
Reflector orange Ø60mm ArtNr. 13363
Reflector orange Ø60mm
-
Cable set 6m/13pin/bayonet/with outflow ArtNr. 13366
Cable set 6m/13pin/bayonet/with outflow
-
Base plate s=18 mm ArtNr. 13601
Base plate s=18 mm, 2500 x 1168 mm screen/film brown
Packaging (LxWxH): ca. 2500mm x 1168mm x 18mm