Der Anhänger ist derzeit nicht verfügbar

EPA 250/12 T-RS-STK

Long durability through corrosion-resistant, hot-dip galvanized, twice-compressed board walls Extraordinarily high stability thanks to solid welded frame construction Very versatile Easy maintenance and repair on replaceable (forked) drawbar Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system Model with strengthened rear panel and continuous hinges available

* Der EPA 250/12 T-RS-STK ist nach Verfügbarkeit erhältlich ab dem Zentrallager in Oberaich. Bei Lageranhänger ist montiertes Zubehör im Preis nicht inbegriffen, außer es ist explizit in der Produktbeschreibung angeführt. Zubehör wird in alle Länder geliefert.

Jetzt anfragen

  Show PDF file
Technical details
further information
Produktbeschreibung
Ausstattung
FAQs

Technical details

description value
Total weight 2.600 kg
Load capacity 2.185 kg
Self-weight 415 kg
Total length 3.880 mm
Total width 1.780 mm
Total height 935 mm
Loading dimensions inside - length 2.510 mm
Loading dimensions inside - width 1.250 mm
Loading dimensions inside - height 400 mm
Sill height 535 mm

further information

description value
Material type steel
brake decelerated
Single axle / tandem Tandem (2 axles)
Tires (inches) 14 inch
Number of lashing points 4
Hydraulic system No
Hinged front wall Yes
Tilted No

Product description

Long durability through corrosion-resistant, hot-dip galvanized, twice-compressed board walls Extraordinarily high stability thanks to solid welded frame construction Very versatile Easy maintenance and repair on replaceable (forked) drawbar Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system Model with strengthened rear panel and continuous hinges available

Standard Equipment

  • Lashing possibilities for securing the load
  • Maintenance-free rubber spring axle
  • Elastic-plastic fenders on single axle trailers
  • Sturdy-steel fenders on tandem trailers
  • Multifunctional luminaires
  • Torsion-free chassis
  • Depending on the model 7 or 13-pin light plug
  • Supporting wheel on trailers with run up brakes
  • Depending on the model with hinged front wall
  • Screw-on console for parking supports

Unser passendes Zubehör

Zubehör versandkostenfrei bei Direktkauf eines Anhängers bei Pongratz*

  • Pipe parking supports 700 mm
    Pipe parking supports 700 mm ArtNr. 12374

    Pipe support 700 mm, diam. 48 mm with clamp, per piece, mounted

    Packaging (LxWxH): ca. 750mm x 130mm x 90mm

  • Set Galvanised steel extension walls 800 mm
    Set Galvanised steel extension walls 800 mm ArtNr. 21377

    Set Galvanised steel extension walls 800 mm, laterally opening, for EPA 250 single-axle

  • Spare wheel holder
    Spare wheel holder ArtNr. 20215

    Spare wheel 185/65 R14 with spare wheel holder mounted standing on V-drawbar

  • Spare wheel holder
    Spare wheel holder ArtNr. 20212

    Spare wheel holder, on V-towing bar

  • Attachment boards steel galvanised
    Attachment boards steel galvanised ArtNr. 13262

    Set attachment walls, galvanised steel 600 mm, Pipe hinge, for EPA 250 tandem

  • Buttons on baseboard wall
    Buttons on baseboard wall ArtNr. 20633

    Buttons on baseboard wall to EPA 250/12

  • Attachment boards steel galvanised
    Attachment boards steel galvanised ArtNr. 16774

    Set attachment boards steel galvanised 800 mm, tubular hinge

  • Buttons on attachment boards
    Buttons on attachment boards ArtNr. 20634

    Buttons on attachment boards to EPA 250/12

  • Attachment boards steel galvanised 600 mm
    Attachment boards steel galvanised 600 mm ArtNr. 13261

    Set Galvanised steel additionals sidewalls 600 mm, sideways. opening, for EPA 250 tandem

  • Attachment boards steel galvanised 800 mm
    Attachment boards steel galvanised 800 mm ArtNr. 13260

    Set Galvanised steel additionals sidewalls 800 mm, sideways. opening, for EPA 250 tandem

  • Flat tarpaulin 250/12 grey (tarpaulin knobs or hooks not included in delivery)
    Flat tarpaulin 250/12 grey (tarpaulin knobs or hooks not included in delivery) ArtNr. 10412

    €195.88 inkl. Mwst.
    Flat tarpaulin 250/12 grey (tarpaulin knobs or hooks not included in delivery)

    Packaging (LxWxH): ca. 400mm x 350mm x 100mm

    Auf Lager
  • aluminium tarpaulin-transverse bow
    aluminium tarpaulin-transverse bow ArtNr. 10935

    €41.88 inkl. Mwst.
    aluminium tarpaulin-transverse bow adjustable (loading compartment width 1000 mm to 1450 mm)

    Packaging (LxWxH): ca. 800mm x 90mm x 60mm

    Auf Lager
  • Garn. Cover buttons (15 unit)
    Garn. Cover buttons (15 unit) ArtNr. 20365

    €43.20 inkl. Mwst.
    Set Tarpaulin buttons (30 pieces), plastic, with screws

    Auf Lager
  • Aluminum cover tiltable
    Aluminum cover tiltable ArtNr. 11131

    Aluminium lid tiltable, lockable (with lifting aid) opening to the front suitable for: EPA 250/12

    Packaging (LxWxH): ca. 2500mm x 1300mm x 100mm

  • Lattice cover frame 100 mm galv. with tarpaulin (with lifting aid) front opening
    Lattice cover frame 100 mm galv. with tarpaulin (with lifting aid) front opening ArtNr. 11129

    Grid tarpaulin frame 100 mm galvanised with tarpaulin with lifting aid, EPA 250/12

    Packaging (LxWxH): ca. 2500mm x 1350mm x 120mm

  • Motorcycle rocker with stand
    Motorcycle rocker with stand ArtNr. 15327

    €209.04 inkl. Mwst.
    Motorcycle rocker with stand suitable for wheel width from 90 to130 mm suitable for wheel diameter width from 16 to19 Zoll Length: ca. 820 mm wide: ca. 480 mm

    Packaging (LxWxH): ca. 670mm x 490mm x 190mm
    Zur Montageanleitung

    Auf Lager
  • Aluminium-loading ramps B 400-2
    Aluminium-loading ramps B 400-2 ArtNr. 12347

    €237.60 inkl. Mwst.
    Garn. aluminium-loading ramps load capacity 400 kg, length: 2000 cm, width : 200cm Drive-up height min/max 517-575mm

    Auf Lager
  • Aluminium-loading ramps B 400-2
    Aluminium-loading ramps B 400-2 ArtNr. 12345

    €284.40 inkl. Mwst.
    1 pair of curved ALU loading rails 400kg/pair W=200,L=2000 Drive-on height min/max 517-575mm for pneumatic wheels

    Packaging (LxWxH): ca. 1995mm x 200mm x 53mm

    Auf Lager
  • Aluminium-loading ramps S 1000-2
    Aluminium-loading ramps S 1000-2 ArtNr. 12343

    €418.80 inkl. Mwst.
    Garn. aluminium-loading ramps S 1000-2,0 (upright) load capacity 1000 kg, length: 200 cm, width : 26 cm

    Packaging (LxWxH): ca. 2000mm x 260mm x 60mm

    Auf Lager
  • Aluminium-loading ramps S 1000-2
    Aluminium-loading ramps S 1000-2 ArtNr. 12344

    €501.50 inkl. Mwst.
    1 pair of ALU loading rails straight 1000kg/pair W=260,L=2500 Drive-up height min/max 647-718mm for vehicles with pneumatic tyres

    Packaging (LxWxH): ca. 2500mm x 260mm x 190mm

    Auf Lager
  • 1 piece ALU drive-on ramp
    1 piece ALU drive-on ramp ArtNr. 19014

    1 piece ALU drive-on ramp, load capacity each ramp pair: 2700kg, L: 2500mm, W: 350mm, Standard support

Passende Ersatzteile zu Ihrem EPA 250/12 T-RS-STK

Ersatzteile versandkostenfrei bei Direktkauf eines Anhängers bei Pongratz*

  • Galvanised support bracket for AE bottom installation
    Galvanised support bracket for AE bottom installation ArtNr. 14608VZ

    €27.24 inkl. Mwst.
    Galvanised support bracket for AE bottom installation

    Packaging (LxWxH): ca. 240mm x 30mm x 150mm

    Auf Lager
  • ArtNr. 14682

    €31.80 inkl. Mwst.
    Brake compensation tandem ALKO

    Auf Lager
  • Clamp II DM 60 for supporting wheel II
    Clamp II DM 60 for supporting wheel II ArtNr. 14765

    €16.08 inkl. Mwst.
    Clamp II DM 60 for supporting wheel II

    Packaging (LxWxH): ca. 130mm x 100mm x 190mm

    Auf Lager
  • Tension lock EPA
    Tension lock EPA ArtNr. 14773

    €8.04 inkl. Mwst.
    Tension lock EPA

    Packaging (LxWxH): ca. 225mm x 90mm x 40mm

    Auf Lager
  • Buffer for front board wall
    Buffer for front board wall ArtNr. 14842

    €6.96 inkl. Mwst.
    Buffer for front board wall, suitable for PHL and LH

    Auf Lager
  • Ball nut M 10 35mm
    Ball nut M 10 35mm ArtNr. 14929

    €0.84 inkl. Mwst.
    Ball nut M 10 35mm

    Auf Lager
  • Front base board wall EPA 206/12 - 250/12
    Front base board wall EPA 206/12 - 250/12 ArtNr. 15378VZ

  • Galvanised rear base board wall EPA
    Galvanised rear base board wall EPA ArtNr. 15382VZ

  • cover cap 35x35
    cover cap 35x35 ArtNr. 11777

    €0.60 inkl. Mwst.
    cover cap 35x35

    Auf Lager
  • connection bracket M8 for LPA /EPA/FPA
    connection bracket M8 for LPA /EPA/FPA ArtNr. 11805

    €2.88 inkl. Mwst.
    connection bracket M8 for LPA /EPA/FPA

    Packaging (LxWxH): ca. 68mm x 58mm x 15mm

    Auf Lager
  • sidelight
    sidelight ArtNr. 11819

    €9.00 inkl. Mwst.
    sidelight, type: DC with bracket

    Packaging (LxWxH): ca. 100mm x 70mm x 50mm

    Auf Lager
  • DC plug
    DC plug ArtNr. 11876

    €1.32 inkl. Mwst.
    DC plug

    Packaging (LxWxH): ca. 30mm x 30mm x 15mm

    Auf Lager
  • mudguards
    mudguards ArtNr. 11991

    €74.16 inkl. Mwst.
    mudguards, tandem, steel, for tyres 13 inch (span 1550 mm, width 200 mm)

    Packaging (LxWxH): ca. 1550mm x 200mm x 410mm

    Auf Lager
  • Plug holder AL-KO
    Plug holder AL-KO ArtNr. 12147

    €6.00 inkl. Mwst.
    Plug holder AL-KO

    Packaging (LxWxH): ca. 95mm x 60mm x 50mm

    Auf Lager
  • brake cable
    brake cable ArtNr. 12211

    €16.56 inkl. Mwst.
    brake cable, with fitting, new version with fitting, HL 1320

    Auf Lager
  • brake cable
    brake cable ArtNr. 12215

    €17.28 inkl. Mwst.
    brake cable, with fitting, new version with fitting, HL 770

    Packaging (LxWxH): ca. 990mm x 30mm x 30mm

    Auf Lager
  • wheelscrews
    wheelscrews ArtNr. 12409

    €1.44 inkl. Mwst.
    wheelscrews, sphere ribbon

    Packaging (LxWxH): ca. 45mm x 25mm x 25mm

    Auf Lager
  • Light Multipoint 5
    Light Multipoint 5 ArtNr. 17747

    €20.40 inkl. Mwst.
    Light Multipoint 5 left with licence plate light with rear fog light 5-pin

    Packaging (LxWxH): ca. 240mm x 140mm x 80mm

    Auf Lager
  • Light Multipoint 5
    Light Multipoint 5 ArtNr. 17748

    €19.68 inkl. Mwst.
    Light Multipoint 5 right with licence plate light with reversing light 5-pin

    Packaging (LxWxH): ca. 240mm x 140mm x 80mm

    Auf Lager
  • Control device with V-connection 251S
    Control device with V-connection 251S ArtNr. 12618

    €338.88 inkl. Mwst.
    Control device with V-connection 251S, bottom mounting, with gas spring, weight range 1500-2700kg

    Auf Lager
  • Wheel 185/65 R14
    Wheel 185/65 R14 ArtNr. 12767

    €159.96 inkl. Mwst.
    Wheel 185/65 R14 on rim 5½Jx14 ET+30 Bolt circle 5x112

    Auf Lager
  • Licence plate holder black
    Licence plate holder black ArtNr. 19346

    €3.72 inkl. Mwst.
    Licence plate holder black

    Packaging (LxWxH): ca. 525mm x 140mm x 15mm

    Auf Lager
  • Pongratz dirt trap red with logo 'P'
    Pongratz dirt trap red with logo 'P' ArtNr. 19347

    €5.28 inkl. Mwst.
    Pongratz dirt trap red with logo 'P'

    Auf Lager
  • Supporting wheel II without clamp 1200 -
    Supporting wheel II without clamp 1200 - ArtNr. 12882

    €87.12 inkl. Mwst.
    Supporting wheel II without clamp 1200 - 1600 kg total weight

    Packaging (LxWxH): ca. 605mm x 280mm x 105mm

    Auf Lager
  • bracket for wheel chock
    bracket for wheel chock ArtNr. 21322

    €2.04 inkl. Mwst.
    bracket for wheel chock, plastic

    Auf Lager
  • wheel chock
    wheel chock ArtNr. 21323

    €4.32 inkl. Mwst.
    wheel chock, plastic

    Auf Lager
  • Reflector orange Ø60mm
    Reflector orange Ø60mm ArtNr. 13363

    €0.96 inkl. Mwst.
    Reflector orange Ø60mm

    Auf Lager
  • Cable set 6m/13pin/bayonet/with outflow
    Cable set 6m/13pin/bayonet/with outflow ArtNr. 13366

    €50.88 inkl. Mwst.
    Cable set 6m/13pin/bayonet/with outflow

    Auf Lager
  • Base plate s=18 mm
    Base plate s=18 mm ArtNr. 13601

    €239.64 inkl. Mwst.
    Base plate s=18 mm, 2500 x 1168 mm screen/film brown

    Packaging (LxWxH): ca. 2500mm x 1168mm x 18mm

    Lieferzeit auf Anfrage
  • Base plate s=18 mm
    Base plate s=18 mm ArtNr. 13601

    €239.64 inkl. Mwst.
    Base plate s=18 mm, 2500 x 1168 mm screen/film brown

    Packaging (LxWxH): ca. 2500mm x 1168mm x 18mm

    Lieferzeit auf Anfrage
  • Reflector orange Ø60mm
    Reflector orange Ø60mm ArtNr. 13363

    €0.96 inkl. Mwst.
    Reflector orange Ø60mm

    Auf Lager
  • Cable set 6m/13pin/bayonet/with outflow
    Cable set 6m/13pin/bayonet/with outflow ArtNr. 13366

    €50.88 inkl. Mwst.
    Cable set 6m/13pin/bayonet/with outflow

    Auf Lager
  • Base plate s=18 mm
    Base plate s=18 mm ArtNr. 13601

    €239.64 inkl. Mwst.
    Base plate s=18 mm, 2500 x 1168 mm screen/film brown

    Packaging (LxWxH): ca. 2500mm x 1168mm x 18mm

    Lieferzeit auf Anfrage
SKU: 13601 Category:

Related products