AT 4000 T-K
Long durability through welded, hot-dip galvanized chasis and tiltable plateau Stability and resilience thanks to 3-sided railing frame Two robust aluminum ramps storable under the loading area Two infinitely adjustable wheel stops Tiltable loading ramp with closed floor, flat drive-up angle and gas-pressure-spring supported lifting aid Optional hydraulic tipping Very versatile High quality, track-adherent chassis Slip- and water-resistant base plate provides high resistance and is replaceable Accessories to customize the trailer available Individual approval in Austria and Germany
Long durability through welded, hot-dip galvanized chasis and tiltable plateau Stability and resilience thanks to 3-sided railing frame Two robust aluminum ramps storable under the loading area Two infinitely adjustable wheel stops Tiltable loading ramp with closed floor, flat drive-up angle and gas-pressure-spring supported lifting aid Optional hydraulic tipping Very versatile High quality, track-adherent chassis Slip- and water-resistant base plate provides high resistance and is replaceable Accessories to customize the trailer available Individual approval in Austria and Germany
- Lashing possibilities for securing the load
- Maintenance-free rubber spring axle
- Steel fenders
- Multifunctional luminaires
- Torsion-free chassis
- 13-pin light plug
- Supporting wheel
- 2 robust steel ramps
- 2 wheel stops
- Long supports (without threaded spindles)
Unsere Ersatzteile für Ihren Anhänger
-
Galvanised counter nut for wheel ArtNr. 14552VZ
-
Tie-bar PHL/LH ArtNr. 14777
Tie-bar PHL/LH
Packaging (LxWxH): ca. 60mm x 60mm x 10mm -
Counter plate for Tie-bar PHL/LH ArtNr. 14778
Counter plate for Tie-bar PHL/LH
Packaging (LxWxH): ca. 90mm x 30mm x 6mm -
Tension lock L-AT/PAT/AT ArtNr. 14779
Tension lock L-AT/PAT/AT
Packaging (LxWxH): ca. 280mm x 90mm x 40mm -
Side marking light Flatpoint II orange with cable for PBA ArtNr. 14786
Side marking light Flatpoint II orange with cable for PBA
-
Cable set 10m/13pin/bayonet/with outflow ArtNr. 14795
Cable set 10m/13pin/bayonet/with outflow
Packaging (LxWxH): ca. 340mm x 340mm x 70mm -
Handle red ALKO/for PBA ArtNr. 14950
Handle red ALKO/for PBA
Packaging (LxWxH): ca. 50mm x 25mm x 25mm -
safety chain G3 x 26 galvanised 200 mm ArtNr. 15009
safety chain G3 x 26 galvanised 200 mm, 2 rings mounted
Packaging (LxWxH): ca. 260mm x 30mm x 10mm -
Lynch pin 4x27 small ArtNr. 15010
Lynch pin 4x27 small
-
Clamp plate for supporting wheel holder ArtNr. 15031
Clamp plate for supporting wheel holder
Packaging (LxWxH): ca. 150mm x 70mm x 35mm -
Hand wheel screw ArtNr. 15640
Hand wheel screw M14 for clamp plate
Packaging (LxWxH): ca. 185mm x 55mm x 25mm -
cover cap 40x40 ArtNr. 11778
cover cap 40x40
-
sidelight ArtNr. 11818
sidelight, type: DC with rubber tab
Packaging (LxWxH): ca. 120mm x 70mm x 50mm -
DC plug ArtNr. 11876
DC plug
Packaging (LxWxH): ca. 30mm x 30mm x 15mm -
spring bolt lock ArtNr. 11883
spring bolt lock
-
registration plate light ArtNr. 11932
registration plate light, type: Aspöck DC, small
Packaging (LxWxH): ca. 85mm x 75mm x 30mm -
Plug holder AL-KO ArtNr. 12147
Plug holder AL-KO
Packaging (LxWxH): ca. 95mm x 60mm x 50mm -
brake cable ArtNr. 12211
brake cable, with fitting, new version with fitting, HL 1320
-
brake cable ArtNr. 12216
brake cable, with fitting, new version with fitting, HL 890
-
shock absorbers for overrun brake ArtNr. 12328
shock absorbers for overrun brake , to 2500 kg old version
-
wheelscrews ArtNr. 12409
wheelscrews, sphere ribbon
Packaging (LxWxH): ca. 45mm x 25mm x 25mm -
Light Multipoint 5 ArtNr. 17750
Light Multipoint 5 Left without licence plate light with rear fog light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 75mm -
Light Multipoint 5 ArtNr. 17751
Light Multipoint 5 Right without licence plate light with reversing light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 75mm -
Control device with V-connection 251S ArtNr. 12607
Control device with V-connection 251S, top mounting, with gas spring, weight range 1500-2700kg
-
Wheel 195/55 R 10 C ArtNr. 12769
Wheel 195/55 R 10 C on rim 6Jx10 ET-4 Bolt circle 5x112
Packaging (LxWxH): ca. 468.5mm x 468.5mm x 195mm -
Pongratz dirt trap red with logo 'P' ArtNr. 19347
Pongratz dirt trap red with logo 'P'
-
Supporting wheel II without clamp 1200 - ArtNr. 12882
Supporting wheel II without clamp 1200 - 1600 kg total weight
Packaging (LxWxH): ca. 605mm x 280mm x 105mm -
bracket for wheel chock ArtNr. 21322
bracket for wheel chock, plastic
-
wheel chock ArtNr. 21323
wheel chock, plastic
-
Reflector orange Ø60mm ArtNr. 13363
Reflector orange Ø60mm