Spare tire 155/80R13 ArtNr. 20530
Der Anhänger ist derzeit nicht verfügbar
MA 250 U-K
Long durability through hot-dip galvanized chassis High stability thanks to bolted frame construction Suitable for the safe transport of one motorcycles Release system with foot control Very versatile Tiltable loading ramp with flat drive-up angle Removable license plate can be used as ramp rail Footboard (base plate) on both sides of the stand ramp for secure loading Easy maintenance and repair on replaceable components
* Der MA 250 U-K ist nach Verfügbarkeit erhältlich ab dem Zentrallager in Oberaich. Bei Lageranhänger ist montiertes Zubehör im Preis nicht inbegriffen, außer es ist explizit in der Produktbeschreibung angeführt. Zubehör wird in alle Länder geliefert.
Jetzt anfragen
Show PDF file
Technical details
further information
Produktbeschreibung
Ausstattung
FAQs
| description | value |
|---|---|
| Total weight | 750 kg |
| Load capacity | 592 kg |
| Self-weight | 158 kg |
| Total length | 3.288 mm |
| Total width | 1.600 mm |
| Total height | 740 mm |
| Loading dimensions inside - length | 2.480 mm |
| Loading dimensions inside - width | 200 mm |
| Loading dimensions inside - height | - |
| Sill height | 285 mm |
| description | value |
|---|---|
| Material type | steel |
| brake | unrestrained |
| Single axle / tandem | Single axle (1 axle) |
| Tires (inches) | 13 inch |
| Number of lashing points | 9 |
| Hydraulic system | No |
| Hinged front wall | No |
| Tilted | Yes |
Long durability through hot-dip galvanized chassis High stability thanks to bolted frame construction Suitable for the safe transport of one motorcycles Release system with foot control Very versatile Tiltable loading ramp with flat drive-up angle Removable license plate can be used as ramp rail Footboard (base plate) on both sides of the stand ramp for secure loading Easy maintenance and repair on replaceable components
- 9 tie-rings at the frame for securing the motorcycle
- Maintenance-free rubber spring axle
- Elastic-plastic fenders
- Multifunctional luminaires
- Torsion-free chassis of the trailer
- 13-pin light plug
- One stand rail with front wheel bracket
- Supporting wheel
Unser passendes Zubehör
Zubehör versandkostenfrei bei Direktkauf eines Anhängers bei Pongratz*
Passende Ersatzteile zu Ihrem MA 250 U-K
Ersatzteile versandkostenfrei bei Direktkauf eines Anhängers bei Pongratz*
-
Clamp I DM 48 for supporting ArtNr. 14760€9.96 inkl. Mwst.Clamp I DM 48 for supporting wheel I/parking supports 600/700
Packaging (LxWxH): ca. 131mm x 148mm x 66mm -
End cap for 2-wire cable square ArtNr. 14785€0.72 inkl. Mwst.End cap for 2-wire cable square
-
Cable set 5m/13pin/bayonet/with outflow for MA 250 U-K ArtNr. 14807€39.12 inkl. Mwst.Cable set 5m/13pin/bayonet/with outflow for MA 250 U-K
-
ArtNr. 14947€0.96 inkl. Mwst.Reflector white Ø60 mm, screwable
-
safety chain G3 x 26 galvanised 200 mm ArtNr. 15009€5.04 inkl. Mwst.safety chain G3 x 26 galvanised 200 mm, 2 rings mounted
Packaging (LxWxH): ca. 260mm x 30mm x 10mm -
Lynch pin 8x42 large ArtNr. 15413€5.04 inkl. Mwst.Lynch pin 8x42 large
-
cover cap 35x35 ArtNr. 11777€0.60 inkl. Mwst.cover cap 35x35
-
cover cap 40x40 ArtNr. 11778€0.84 inkl. Mwst.cover cap 40x40
-
DC plug ArtNr. 11876€1.32 inkl. Mwst.DC plug
Packaging (LxWxH): ca. 30mm x 30mm x 15mm -
Tension spring long for MA L=139.4mm T=14mm ArtNr. 16026 Tension spring long for MA L=139.4mm T=14mm
-
Tension spring short for MA L=75.2mm T=14mm ArtNr. 16027 Tension spring short for MA L=75.2mm T=14mm
-
registration plate light ArtNr. 11932€6.00 inkl. Mwst.registration plate light, type: Aspöck DC, small
Packaging (LxWxH): ca. 85mm x 75mm x 30mm -
Plug holder AL-KO ArtNr. 12147€6.00 inkl. Mwst.Plug holder AL-KO
Packaging (LxWxH): ca. 95mm x 60mm x 50mm -
V-coupling type 75 VR ArtNr. 16762 V-coupling type 75 VR, 750kg, top, with loop
-
Earpoint III right with reversing light for MA 250 U-K ArtNr. 16766€21.84 inkl. Mwst.Earpoint III right with reversing light for MA 250 U-K
-
Earpoint III left with rear fog light for MA 250 U-K ArtNr. 16767€21.36 inkl. Mwst.Earpoint III left with rear fog light for MA 250 U-K
-
Locking bolt MA10 for MA ArtNr. 16769€14.40 inkl. Mwst.Locking bolt MA10 for MA
-
Mudguards both sides round MA span 730 ArtNr. 16772€21.48 inkl. Mwst.Mudguards both sides round MA span 730 mm
-
wheelscrews ArtNr. 12408€1.32 inkl. Mwst.wheelscrews, conical collar
Packaging (LxWxH): ca. 45mm x 25mm x 25mm -
Buffer for MA 250 U-K ArtNr. 17442€12.48 inkl. Mwst.Buffer for MA 250 U-K parabolic T=50 H=50 M8x36mm outer thread
-
Galvanised wheel holder ArtNr. 16883VZ€93.72 inkl. Mwst.Galvanised wheel holder fits for: MA 250 U-K, version A
-
Wheel 155/80 R13 ArtNr. 12770€111.72 inkl. Mwst.Wheel 155/80 R13 on rim 4Jx13 ET+30 Bolt circle 4x100
Packaging (LxWxH): ca. 580mm x 0.1mm x 150mm -
Rear reflector orange ArtNr. 19254€0.96 inkl. Mwst.Rear reflector orange adhesive 69x31.5mm for L-RK
-
Licence plate holder black ArtNr. 19346€3.72 inkl. Mwst.Licence plate holder black
Packaging (LxWxH): ca. 525mm x 140mm x 15mm -
Pongratz dirt trap red with logo 'P' ArtNr. 19347€5.28 inkl. Mwst.Pongratz dirt trap red with logo 'P'
-
Supporting wheel I without clamp up to 1300 kg total weight ArtNr. 12881€31.08 inkl. Mwst.Supporting wheel I without clamp up to 1300 kg total weight
Packaging (LxWxH): ca. 630mm x 270mm x 70mm
