LPA 300/15 G-AL
Maximum corrosion protection through anodised aluminium board walls. Stability due to an aluminium double frame cavity profile and continuous drawbar Board walls with anchors to stabilize the external side walls Solid board latches Easy storage through positioning on the back due to low self-weight and size (depending on the model) Very versatile Hinged rear panel Easy maintenance and repair on replaceable drawbar, board walls and frame parts Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system
Maximum corrosion protection through anodised aluminium board walls. Stability due to an aluminium double frame cavity profile and continuous drawbar Board walls with anchors to stabilize the external side walls Solid board latches Easy storage through positioning on the back due to low self-weight and size (depending on the model) Very versatile Hinged rear panel Easy maintenance and repair on replaceable drawbar, board walls and frame parts Slip- and water-resistant base plate provides high resistance and is replaceable Numerous accessories to customize the trailer Quick and easy setup of accessory through modular plug-in system
- Lashing possibilities for securing the load
- Maintenance-free rubber spring axle
- Two continuous anti-vibration fenders serve as an additional stable base edge
- Elastic-plastic fenders on single axle trailers
- Sturdy-steel fenders on tandem trailers
- Multifunctional luminaires
- Torsion-free chassis
- Depending on the model 7 or 13-pin light plug
- Supporting wheel on trailers with run up brakes
- Buttons to attach tarpaulins already pre-mounted
- Depending on the model with hinged front wall
Unser passendes Zubehör
-
Aluminum attachment boards anodized 360 mm ArtNr. 18875 additional sidewalls 360 mm, anodised aluminium suitable for: LPA 300/15-AL Version 2016
-
Tube parking support ArtNr. 20003 Pipe support 700mm, incl. retaining plate (mounted)/piece suitable for: LPA ALU version 2016
-
Set for mounting attachment board to attachment board ArtNr. 19994 Securing set for mounting Attachment wall to attachment wall suitable for: LPA,FPA
-
Galvanised cover frame 1300 mm from the side ArtNr. 18877 Galvanised tarpaulin frame 1300 mm from the drop side, pluggable (loading height: 1660 mm) suitable for: LPA 300/15-AL Version 2016
-
Spare wheel holder ArtNr. 20212 Spare wheel holder, on V-towing bar
-
High tarpaulin grey for PG 1300 mm ArtNr. 10993
Packaging (LxWxH): ca. 570mm x 370mm x 200mm -
Spare wheel holder ArtNr. 20215 Spare wheel 185/65 R14 with spare wheel holder mounted standing on V-drawbar
-
Flat tarpaulin grey for LPA 300/15 ArtNr. 10413€166.80 inkl. Mwst.Flat tarpaulin grey for LPA 300/15
Packaging (LxWxH): ca. 480mm x 400mm x 110mm -
set expander hooks white (30 items) ArtNr. 20796€43.20 inkl. Mwst.set expander hooks white (30 items)
-
tarpaulins-transverse bow aus aluminium ArtNr. 11036€53.88 inkl. Mwst.Tarpaulin cross bar made of ALU, adjustable (load box width 1,400 mm to 2,100 mm) / piece
Packaging (LxWxH): ca. 1180mm x 90mm x 60mm -
Aluminum cover tiltable ArtNr. 18879 Aluminium lid tiltable, lockable (w. lifting aid) can be opened sideways suitable for: LPA 300/15-AL Version 2016
-
H-frame 450 mm ArtNr. 19608 H-frame 450 mm, for LPA /15
-
Galvanized perforated metal railing set ArtNr. 13577 1 pair of perforated sheet railing galvanised suitable for: LPA 300/15 ALU
Packaging (LxWxH): ca. 2930mm x 58mm x 30mm -
Motorcycle rocker with stand ArtNr. 15327€209.04 inkl. Mwst.Motorcycle rocker with stand suitable for wheel width from 90 to130 mm suitable for wheel diameter width from 16 to19 Zoll Length: ca. 820 mm wide: ca. 480 mm
Packaging (LxWxH): ca. 670mm x 490mm x 190mm -
Aluminium-loading ramps B 400-2 ArtNr. 12347€237.60 inkl. Mwst.Garn. aluminium-loading ramps load capacity 400 kg, length: 2000 cm, width : 200cm Drive-up height min/max 517-575mm
-
Aluminium-loading ramps B 400-2 ArtNr. 12345€284.40 inkl. Mwst.1 pair of curved ALU loading rails 400kg/pair W=200,L=2000 Drive-on height min/max 517-575mm for pneumatic wheels
Packaging (LxWxH): ca. 1995mm x 200mm x 53mm -
Aluminium-loading ramps S 1000-2 ArtNr. 12343€418.80 inkl. Mwst.Garn. aluminium-loading ramps S 1000-2,0 (upright) load capacity 1000 kg, length: 200 cm, width : 26 cm
Packaging (LxWxH): ca. 2000mm x 260mm x 60mm -
Aluminium-loading ramps S 1000-2 ArtNr. 12344€501.50 inkl. Mwst.1 pair of ALU loading rails straight 1000kg/pair W=260,L=2500 Drive-up height min/max 647-718mm for vehicles with pneumatic tyres
Packaging (LxWxH): ca. 2500mm x 260mm x 190mm
Unsere Ersatzteile für Ihren Anhänger
-
Galvanised support bracket for AE bottom installation ArtNr. 14608VZ€27.24 inkl. Mwst.Galvanised support bracket for AE bottom installation
Packaging (LxWxH): ca. 240mm x 30mm x 150mm -
ArtNr. 14681€4.80 inkl. Mwst.
-
Clamp I DM 48 for supporting ArtNr. 14760€9.96 inkl. Mwst.Clamp I DM 48 for supporting wheel I/parking supports 600/700
Packaging (LxWxH): ca. 131mm x 148mm x 66mm -
Door buffer white for EPA ArtNr. 14868€1.56 inkl. Mwst.Door buffer white for EPA, rubber 10x20mm
-
Lynch pin/round/4.5 x ArtNr. 14891€0.72 inkl. Mwst.Lynch pin/round/4.5 x 18mm
Packaging (LxWxH): ca. 30mm x 25mm x 10mm -
Ball nut M 10 35mm ArtNr. 14929€0.84 inkl. Mwst.Ball nut M 10 35mm
-
cover cap 30x30 ArtNr. 11776€0.48 inkl. Mwst.cover cap 30x30
Packaging (LxWxH): ca. 30mm x 30mm x 15mm -
aluminium-mounting lock left for LPA 360 mm ArtNr. 11794€30.00 inkl. Mwst.aluminium-mounting lock left for LPA 360 mm
Packaging (LxWxH): ca. 360mm x 95mm x 30mm -
aluminium-mounting lock right for LPA 360mm ArtNr. 11796€30.00 inkl. Mwst.aluminium-mounting lock right for LPA 360mm
Packaging (LxWxH): ca. 360mm x 95mm x 30mm -
sidelight ArtNr. 11819€9.00 inkl. Mwst.sidelight, type: DC with bracket
Packaging (LxWxH): ca. 100mm x 70mm x 50mm -
Hinge 125mm LPA New ArtNr. 15819€6.36 inkl. Mwst.Hinge 125mm LPA New
-
DC plug ArtNr. 11876€1.32 inkl. Mwst.DC plug
Packaging (LxWxH): ca. 30mm x 30mm x 15mm -
counter piece for mounting lock LPA ArtNr. 11910€2.52 inkl. Mwst.counter piece for mounting lock LPA
Packaging (LxWxH): ca. 95mm x 30mm x 15mm -
registration plate light ArtNr. 11932€6.00 inkl. Mwst.registration plate light, type: Aspöck DC, small
Packaging (LxWxH): ca. 85mm x 75mm x 30mm -
brake cable ArtNr. 12216€17.28 inkl. Mwst.brake cable, with fitting, new version with fitting, HL 890
-
wheelscrews ArtNr. 12409€1.44 inkl. Mwst.wheelscrews, sphere ribbon
Packaging (LxWxH): ca. 45mm x 25mm x 25mm -
Light Multipoint 5 ArtNr. 17750€20.40 inkl. Mwst.Light Multipoint 5 Left without licence plate light with rear fog light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 75mm -
Light Multipoint 5 ArtNr. 17751€19.68 inkl. Mwst.Light Multipoint 5 Right without licence plate light with reversing light 5-pin
Packaging (LxWxH): ca. 240mm x 140mm x 75mm -
Control device with V-connection 161S ArtNr. 12617€267.60 inkl. Mwst.Control device with V-connection 161S, bottom mounting, with gas spring, weight range 950-1600kg
-
Wheel 185/65 R14 ArtNr. 12767€159.96 inkl. Mwst.Wheel 185/65 R14 on rim 5½Jx14 ET+30 Bolt circle 5x112
-
Tie-bar curved ArtNr. 18899€6.60 inkl. Mwst.Tie-bar curved for LPA with aluminium board walls from 08/2016
-
Licence plate holder black ArtNr. 19346€3.72 inkl. Mwst.Licence plate holder black
Packaging (LxWxH): ca. 525mm x 140mm x 15mm -
Pongratz dirt trap red with logo 'P' ArtNr. 19347€5.28 inkl. Mwst.Pongratz dirt trap red with logo 'P'
-
ArtNr. 18108VZ
-
ArtNr. 18672VZ
-
Supporting wheel I without clamp up to 1300 kg total weight ArtNr. 12881€31.08 inkl. Mwst.Supporting wheel I without clamp up to 1300 kg total weight
Packaging (LxWxH): ca. 630mm x 270mm x 70mm -
ArtNr. 18897
-
ArtNr. 18898
-
bracket for wheel chock ArtNr. 21322€2.04 inkl. Mwst.bracket for wheel chock, plastic
-
wheel chock ArtNr. 21323€4.32 inkl. Mwst.wheel chock, plastic
-
mudguards ArtNr. 11984€27.36 inkl. Mwst.mudguards, single-axle, plastic, for tyres 13 inch (span 750 mm, width 200 mm) both-sided round
-
Base plate s=15 mm ArtNr. 13347€262.08 inkl. Mwst.Base plate s=15 mm, 3000 x 1500 mm screen/film
Packaging (LxWxH): ca. 3000mm x 1500mm x 15mm -
Reflector orange Ø60mm ArtNr. 13363€0.96 inkl. Mwst.Reflector orange Ø60mm
-
Cable set 6m/13pin/bayonet/with outflow ArtNr. 13366€50.88 inkl. Mwst.Cable set 6m/13pin/bayonet/with outflow